@Greg_Simpson wrote:
ok - so ml 350 g6 with 4 x 2TB drives in the external drive bays hooked up to an old lsi SAS raid controller in channel A port
i’ve put some 4 x 500GB drivers in half of the sff drive cage in port B on the LSI card
rockstor recognises the drives - but here’s the thing
how do i use those drives?
the 4 x 2TB drives on channel A are in RAID 10
if i get a second card and plug all 8 slots in the drive cage into the second LSI card
can i configure the 8 x 500GB drives as 2 x 2TB drives and add them to the existing RAID10 pool???
Posts: 3
Participants: 2