@m3elloa wrote:
Brief description of the problem
cli kept old IP address
Detailed step by step instructions to reproduce the problem
Fresh installation with DHCP enabled
After installation, set a different IP in the router for the NIC MAC and reboot
Cli still shows old IP
Router shows new IP live
SSH to new IP ok
if config shows correct ip in the interface:
enp6s0: flags=4163 mtu 1500
inet 10.10.10.18 netmask 255.255.255.0 broadcast 10.10.10.255
inet6 fe80::215:17ff:fedc:2c5e prefixlen 64 scopeid 0x20
ether 00:15:17:dc:2c:5e txqueuelen 1000 (Ethernet)
RX packets 18137 bytes 23491675 (22.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 9017 bytes 3563375 (3.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 18 memory 0xf7a20000-f7a40000cli shows old IP: 10.10.10.131
Web-UI screenshot
Posts: 2
Participants: 1